Tuesday, January 28, 2014

Making a Machine Mat…

To make a Sewing Machine Mat you will need three pieces of fabric…you could even use Fat Quarters if you want your mat just a smidge smaller.  You will need a top focal fabric, a backing, batting and contrasting binding fabric and thread.  In my case I bought the pre-quilted fabric so I didn’t need batting or backing.  You will also need a piece of mesh 5”by the WOF (in my case 24”).  You can make your mat as wide as you like…some of these new machines are huge…so make yours accordingly!)

P1250989

My mat measured 18” X 24” and the piece of mesh was 5” X 24”.

First up…measure and cut a 1 1/2” strip from your contrasting fabric about 12 inches long and press 1/4” in on both sides. (see pic).  Cut into two 6 inch pieces.

P1250992

Divide your mesh into three equal sections, mark and sew these strips onto the division marks.

P1250994

I used a daisy stitch only because I never get to use my embroidery stitches…

P1250995

See how the mesh is plastic so NEVER IRON!P1250995-001

Now cut a strip of fabric 2 1/2” by 24” (or slightly longer than the width of your mat) and turn both edges in 1/4” like you did before and then fold in half…see picture..

P1250993

Tuck the edge of the mesh inside and sew along the edge.  This makes a nice finished edge to your pockets.  Trim the ends.

P1250996

After I pinned the mesh pocket to my mat I stitched it on the bottom and sides just to hold it in place.

P1250997

I also stitched the pocket sections down.  I made sure to go back and forth to knot off the ends as I remember this area gets the most wear and tear!  You might even want to stitch two lines here…

P1250998

Cut your binding just like you would for a quilt.  2 1/2” wide pressed in half…and sew to the edge on the right side and turn…

P1250999

Mine is now all ready for hand stitching the binding to the backing…which I was going to do last night but I was just too tired… so I will do that today!!

P1260001P1260002

I love my little mat…and can’t wait to see what Jan looks like sitting on this sweet thing!!

Thanks Gwen…you are such a great teacher and thanks to Gerry for the mesh!!  (Gwen supplied the Clubhouse gals with the mesh…as Gerry had leftovers after fixing a screen!!)  You can find mesh in most Hardware stores.

Also I am going to lay this rubber under my mat to prevent any sliding…It’s great stuff as I already use it in all the cupboards in the RV…prevents dishes and pots from sliding out the cupboard doors!  I bought it at the Dollar Store (in Canada).P1260003

I may even stitch a square of it to the underside…see if that keeps it from sliding when the ol’machine starts to rock and roll…:o)

This was an easy and fun project to make!!  And it’s SEW pretty!!  Now I might have to make a matching bonnet for the machine and start painting furniture a pretty apple green when I get home…

On Clubhouse Wednesday, I will HAVE to take a picture of all of the finished mats…dang cute!

THANKS, GWEN!!  It’s a SEW SWEET project!

Have a terrific Tuesday and happy Stitching!~P

13 comments:

  1. I love your mat! What a super idea.

    ReplyDelete
  2. Ah! I wish I had thought of the decorative stitches when sewing the mesh! You are one smart lady Paulette!

    ReplyDelete
  3. So lovely! :)
    Greetings from Finland!
    Hugs, Ulla

    ReplyDelete
  4. Great job Paulette,

    If you haven't sewn down your binding make a say 18-24" strip of binding and fold it in half and catch it in the binding on the short side. Then you can roll it up and tuck it away when you aren't using it.

    Enjoy it for many years.

    ReplyDelete
  5. Great machine mat and tutorial. I have a machine mat but the quilt was folded up to create the pockets. I love how you used meshing to be able to see what is in those pockets. Inspirational project.

    SewCalGal
    www.sewcalgal.blogspot.com

    ReplyDelete
  6. You did a beautiful job on the mat and loved the fabrics you used.

    Debbie

    ReplyDelete
  7. Looks fabulous Paulette. Thanks for sharing. I think even I could cope with making that.

    ReplyDelete
  8. Oh P, it's so pretty and the mesh is a great idea.. That way you can see what's in the pockets..I also sew a loop just above the pockets with the binding and tied my scissors to it with a ribbon to keep them handy.. The rubber mat under is a good idea., it I haven't had mine move any at all. Hugs, Maggey

    ReplyDelete
  9. I like your mat and thanks for the tutorial. It is such a good idea.:)

    ReplyDelete
  10. Really great idea! Your fancy stitching looks wonderful too.:)

    ReplyDelete
  11. I am going to have to make one of these when we hit the road this Sept.!

    ReplyDelete
  12. What a great idea. I LoVe your sample! Thanks for the tutorial.

    ReplyDelete
  13. Great mat, can't wait to see them all. Hint: I put one of those pieces of rubber under my foot pedal to stop it from moving on my wood floor. Thanks for your inspiration!

    ReplyDelete